Collection: Oki8432 WT Transfer

Please do your research on OKI and EZ Peel transfer paper prior to ordering as we are not responsible for any pressing errors. ACTUAL COLORS MAY DIFFER FROM THE PICTURE AS THE MONITOR/SCREEN ARE DIFFERENT FROM THE ACTUAL TRANSFER. This listing is for transfers only.

Type: OKI8432 Heat Transfer
Made to Order: Yes
Adult Approx. Size: 8.5x10 and 11x10
Ready to Ship: 3-4 business days
Image Size: Printed Image varies on the sheet to size. The excess will be trimmed off of the final product which will reduce the sheet size
Garments Color: Black, Dark, and Light-Colored

Transfer to Material Instructions:

YOU NEED TO USE A HEAT PRESSfor a successful transfer. A house iron or Circuit press will not work for this process.

•  Carefully remove the textile/substrate from the heat press and allow it to cool completely before peeling away the heat transfer.  Only remove the transfer after it is absolutely cold, failure to do so will result in a faulty transfer.  Start from the corner with the most toner coverage and remove the heat transfer in a quick rapid motion (like ripping off a bandage).

•. To ensure washability and a matte finish, repress your textile/substate with a piece of parchment paper for 20 seconds and at the same temperature you used from the first press chart listed above. The pressure should be bumped up too heavy. If you desire a more shiny finish, use a Teflon sheet instead of parchment paper. 

Pressing instructions:
First Press Time/Temp/Pressure
Cotton: 265-285F - 30 sec - med pressure
50/50: 265-285F - 30 sec - med pressure
Polyester: 265F - 20 sec - med pressure
Cardboard: 230F - 10 sec - med pressure:
Book Covers: 230F - 15 sec - med pressure 

Care Instructions:
Cold wash on a delicate cycle. Use a low dryer setting or hang dry.  Cover the heat transfer with a Teflon sheet while ironing.  Do Not use fabric softener.

Storage Instructions:
Please store any unused transfers away from any dust, excessive heat or moisture.  It is best to store them in a box or ziplock bag to prevent the transfers from getting bent or scratched.

Due to the nature of the product, we do not allow returns or exchanges. If there is an issue with your order, please contact us within 48 hours of receiving your order! It is your responsibility to look over the prints before pressing.

If you have any questions please email support at for assistance.

0 products

Sorry, there are no products in this collection